Your garden is the first impression people have of you. However, an overgrown garden full of weeds can really put off the guest's coming. Nowadays, finding the time to mow your garden could be slightly difficult.
However, Robotic lawnmowers can handle this job with precision. They are programmed such that they can mow the entire area without any help from your side. However, the device needs installation before you start operating it.
Read on to learn more about Robotic Mower installation and how it should be done.
Installing a lawnmower could feel like a challenging task. That is because it requires a lot of care and the scope of error is very high. The mower should know which area to cover and when and how much mowing needs to be done.
Most devices come with a set of instructions. If you follow them carefully, you can install a robot lawn mower all by yourself.
Before using the robotic lawn mower, remember to remove debris, piles of leaves, toys, wires, stones and other obstacles from the lawn.
Before anything, you must know the items and conditions that are necessary for the installation. If your robotic lawn mower needs to be kept in a specific area, you will first have to set the perimeter wire. You will also require a charging station and a guide wire.
It is also required that you program the device before you install the lawnmower. Normally when you buy your robotic lawnmower, the items mentioned are provided. Some other items you may need are:
When wondering about How To Install A Robotic Lawn Mower, this is one thing you cannot ignore is choosing the best place to put the charging station. Normally you should place the charging station in a place with good GPS signal instead of installing it under trees, near walls, or in corners.
You need to place the charge station not perpendicular to the perimeter but along the perimeter. Lay the wire at least 30 cm/12 in in front of the charging station and 1 m/3ft behind in a straight line.
The installation direction of the charging station is important. If you are standing outside the boundary wire and facing the mowing area, then the charging station's head should face toward the right. Conversely, if you are standing inside the boundary line, facing the charging station, the head of the charging station should face toward the left.
The perimeter wire maintains a magnetic field that the robotic lawnmower interprets. You start laying the perimeter wire from the charging station, and that is where it should end too. Use the below tips to place the wire carefully:
Put the robot lawn mower on the charging station, turn the switch button to the right
HOOKII's smart lawn mower has different mowing modes to choose from. If your lawn has complex terrain, many tall trees or buildings, or the grass is very dense, or it is the first time to use a lawn mower to mow, then It is recommended that you use the cross mowing mode, which mows in a cross pattern to effectively increase the mowed coverage area.
If you have other robot lawn mowers and still thinking about How to Install Your Robotic Mower Correctly, we will help you out. Here are the steps that you have to follow:
A robotic lawn mower makes your life pretty easy. If you have correctly installed it, the device does the cutting without any issues. It is easy to set up the device, and you can follow the instructions mentioned above. Just be careful of the laying of the perimeter wire, as that would decide whether the mower can work properly.
The Neomow range of robotic lawn mowers from Hookii offers a wide variety of features and benefits. You can get the instructions on How to install your HOOKII Neomow S robotic lawn mower here. You can get a high-quality service from the device as it supports the systematic movement.